home > News > power supply

How to dispense in the production of power adapters

source:power supply     Popular:adapter     release time:2021-07-10 15:58:50     Article author:sznbone    

  Power supply manufacturers need to use high temperature resistant silica gel when producing power adapters for insulation and fixing, as well as heat conduction. Today, I will share with you how to dispense during operation.

How to dispense in the production of power adapters(图1)

  Preparation before homework:

  1. Wear an electrostatic ring and make sure that it is in good contact with your wrist and electrostatic grounding wire;

  2. Read the work instructions, clarify the content, steps and precautions of the work;

  3. Ready to prepare the dispenser, the technician will debug the dispenser and set the relevant parameters, the air pressure range: 4-5KG/c㎡;

  work procedure:

  1. Reclaiming inspection: Take the product with the built-in parts installed in the process, check that the flying lead after finishing does not exceed the edge of the board, and is tightly attached to the transformer core.

  2. Homework:

  ①Take the PCBA component of the previous process from the assembly line, face up, and find the position of the glue: T1 transformer skeleton and C1 C2 electrolytic capacitor dispensing,

  ②Take the syringe filled with silicone in your right hand, align the needle with the root of the position where you need to dispense, and then step on the pedal to start the dispensing. When discharging the glue, move the needle slowly so that the silicone wraps around 1/3 of the root of the component and releases it. Foot switch

  ③Standardize the operation and correctly dispense the white glue into the position where the glue is needed as shown in the left picture. The white glue does not spill over the PCB board and does not draw wire. After the silicone wraps the bottom 1/3 of the component, put the PCB board into the assembly line and flow down One process; otherwise, it needs to be cleaned with a rag and re-dispensed

  3. Visual inspection of the line: After the self-inspection dispensing is OK, it is neatly placed on the anti-static partition and transferred to the next process.

  Precautions:

  1. The glue must be in place, not on other components, more or less.

  2. The air pressure of the dispenser: 4-5KG/c㎡, and the amount of glue: 2g/set.

  3. Standardize the operation, handle with care, avoid stacking, and do a good job of static protection and 7S in the work area.

  When power adapter manufacturers produce power supplies, each step of the process is strictly in accordance with the operation manual, which greatly reduces the quality problems caused by improper operation. If you need to purchase power products, please contact us.


Read recommendations:

200-500W Switching Power Supply

24-65W Medical Switching Power Supply

24W USB Charger,24W Charger,USB Charger

Parallel current sharing of switching power supplies is becoming more and more popular?power supply

Japan PSE certification requirements for switching power supply adapters

Related Information

Commonly used insulation materials for power cords

2021-10-27

How to repair a switching power supply failure?power supply factory

2021-10-09

Parallel current sharing of switching power supplies is becoming more and more popular?power supply

2021-10-09

What are the classifications of led switching power supplies?

2021-09-18

What are the advantages and disadvantages of switching power supply?UL ADAPTOR company

2021-09-18

Power adapter detection?CE ADAPTOR factory

2021-09-14

What are the classifications of switching power supplies? What are the control principles?switching

2021-09-14

What are the precautions for the power adapter?

2021-09-08

What are the vulnerable components and faults of the switching power supply?MKA ADAPTER price

2021-09-08

What is rail switching power supply? what's the effect?

2021-07-24

What are the modulation methods of switching power supply?

2021-07-24

Where can the power adapter be used?

2021-07-22

What is the reason why the switching power supply has no voltage output?

2021-07-22

Precautions for the use of switching power supply

2021-07-16

Precautions for the use of switching power supply!

2021-07-16

How to dispense in the production of power adapters

2021-07-10

How to deform the power supply

2021-07-10

Use the power adapter scientifically and safely!

2021-07-10

The development trend of switching power supply industry

2021-05-07

Several important parts of switching power supply

2021-04-30

Features and types of integrated regulated power supply

2021-04-17

The PD power supply manufacturer tells you the choice of PD power adapter material, which is the bes

2021-04-09

Japan PSE certification requirements for switching power supply adapters

2021-03-29

Is the power supply the same as the power adapter?

2021-03-16

The structural principle of switching power supply

2021-03-15

What are the advantages of switching power supply?

2021-03-15

[Power adapter manufacturer] What is the aging test of the power supply?

2021-03-12

Is the power supply the same as the power adapter?

2021-03-12

What is a switching power supply?

2021-02-22

The difference between drive power supply and switching power supply

2021-02-22

Popular recommended products

40W 4USB Charger,40W Charger,4USB Charger

2020-08-27

19V2A 36W Switching Power Supply

2020-08-28

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

MKS-120200EU-36 Switching Power Supply

2020-08-29

EI Power Transformer Power Transformer

2020-08-27

MKS-1401700H Switching Power Supply

2020-08-29

500W Charger,Charger

2020-08-28

QC3.0 24W USB Charger,24W USB Charger,24W USB Charger,USB Charger

2020-08-27

MKS-1202000-36 Switching Power Supply

2020-08-29

EI-28 AC ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter Linear Adapter

2020-08-28

10-24W Charger,24W Charger,10W Charger

2020-08-27

MKS-120200BS-36 Switching Power Supply

2020-08-29

24-65W Switching Power Supply

2020-08-29

Transformer,High Frequency Transformer,Frequency Transformer

2020-08-27

MKD-571202000 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

2020-08-28

Transformer,Power Transformer,Ring Power Transformer

2020-08-27

24W USB Charger,24W Charger,USB Charger

2020-08-27

MKA-571652420 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

2020-08-28

100-300W Charger,100W Charger,200W Charger,300W Charger

2020-08-27

12-36W POE POWER SUPPLY

2020-08-27

12W CAR CHARGER,12W USB CAR CHARGER,CAR CHARGER,12W CHARGER

2020-08-27

MK-C1806028 MKA ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

200-500W Switching Power Supply

2020-08-29

24V21A LED Power Supply 24V Power Supply 21A Power Supply

2020-08-27

60W 6USB Charger,60W Charger,6USB Charger,Charger

2020-08-27

MKS-1201250HEU Switching Power Supply

2020-08-29

24V1.5A 36W Switching Power Supply

2020-08-29

12V2ASwitching Power Supply

2020-08-28

3-12W Medical Switching Power Supply 3W Switching Power Supply 12W Power Supply

2020-08-27

18-25W Switching Power Supply

2020-08-28
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved