home > News > power supply

Precautions for the use of switching power supply

source:power supply     Popular:adapter     release time:2021-07-16 09:55:45     Article author:sznbone    

  Precautions for the use of switching power supply

  1. The input voltage of the switching power supply can be 220V or 110V, and the input voltage range should be reasonably selected according to the circuit design. Otherwise it will cause damage to the switching power supply.

  2. Pay attention to distinguish the ground terminal and the neutral terminal of the output voltage terminal of the switching power supply. And ensure that the switching power supply is grounded reliably.

Precautions for the use of switching power supply(图1)

  3, the metal shell of the switching power supply, the power shell is generally connected to the ground (FG), and it must be reliably grounded to ensure safety. Do not connect the shell to the neutral line by mistake;

  4. Before installing the switching power supply, please check and calibrate the connections on the terminals again, and make sure that the input and output, AC and DC, single-phase and multi-phase, positive and negative, voltage and current values are correct. , Can be energized to run;

  5. For high-power switching power supplies, there are generally two or more "+" output terminals and "-" output terminals. In fact, they belong to the same output electrode. It is just for the convenience of users to connect multiple terminals. Separately connected together internally;

  6. In order to achieve sufficient heat dissipation, the general switching power supply should be installed in a position with good air convection conditions, or installed on the chassis shell to transmit heat to the outside through the shell;

  7. The switching power supply is tested with a resistive load before it leaves the factory. If it needs to be used as a capacitive or inductive load, it should be stated in the order contract in advance;

  8. For dual-channel switching power supply output symmetrical loads, symmetrical output power is preferred;

  9. For users whose switching power supply FG is grounded, it is normal to feel the numbness when touching the casing or output. When floating, FG has an AC output of about 110V to the ground, which is determined by the internal structure of the power supply.

  10. The switching power supply is 100% full and aging before leaving the factory. Generally, the power usage rate is controlled within 80% or lower, which can greatly increase the service life of the power supply. Generally, the life of the capacitor is reduced by half for every 10°C increase in the power supply temperature;

  11. The ripple and noise of the switching power supply are AC components superimposed on the DC output voltage, generally expressed in millivolt peaks;

  12. For all switching power supplies, when there is a sudden change in the load, there will be a certain response time. During this sudden change, the output voltage of the power supply will have a short overshoot process in an instant, and then return to the normal output state. This is Dynamic Response;

  13. Once the switching power supply fails, the factory should be notified as soon as possible, and the factory will be responsible for free maintenance or technical guidance, except for those who disassemble the power supply privately.

  The precautions that must be known for the use of switching power supply are introduced here, and I hope to help you use the switching power supply correctly!


Read recommendations:

MKS-1202000-36 Switching Power Supply

36-65W Switching Power Supply

EI-28 AC ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter Linear Adapter

Is the power supply the same as the power adapter?

How to deform the power supply

Related Information

Commonly used insulation materials for power cords

2021-10-27

How to repair a switching power supply failure?power supply factory

2021-10-09

Parallel current sharing of switching power supplies is becoming more and more popular?power supply

2021-10-09

What are the classifications of led switching power supplies?

2021-09-18

What are the advantages and disadvantages of switching power supply?UL ADAPTOR company

2021-09-18

Power adapter detection?CE ADAPTOR factory

2021-09-14

What are the classifications of switching power supplies? What are the control principles?switching

2021-09-14

What are the precautions for the power adapter?

2021-09-08

What are the vulnerable components and faults of the switching power supply?MKA ADAPTER price

2021-09-08

What is rail switching power supply? what's the effect?

2021-07-24

What are the modulation methods of switching power supply?

2021-07-24

Where can the power adapter be used?

2021-07-22

What is the reason why the switching power supply has no voltage output?

2021-07-22

Precautions for the use of switching power supply

2021-07-16

Precautions for the use of switching power supply!

2021-07-16

How to dispense in the production of power adapters

2021-07-10

How to deform the power supply

2021-07-10

Use the power adapter scientifically and safely!

2021-07-10

The development trend of switching power supply industry

2021-05-07

Several important parts of switching power supply

2021-04-30

Features and types of integrated regulated power supply

2021-04-17

The PD power supply manufacturer tells you the choice of PD power adapter material, which is the bes

2021-04-09

Japan PSE certification requirements for switching power supply adapters

2021-03-29

Is the power supply the same as the power adapter?

2021-03-16

The structural principle of switching power supply

2021-03-15

What are the advantages of switching power supply?

2021-03-15

[Power adapter manufacturer] What is the aging test of the power supply?

2021-03-12

Is the power supply the same as the power adapter?

2021-03-12

What is a switching power supply?

2021-02-22

The difference between drive power supply and switching power supply

2021-02-22

Popular recommended products

EI-48 ADAPTER LINEAR ADAPTOR Switching Power Adapter INTERCHANGEABLE ADAPTOR Linear Adapter

2020-08-28

45W PD Charger,45W Charger,PD Charger

2020-08-27

MKS-120200BS-36 Switching Power Supply

2020-08-29

500W Charger,Charger

2020-08-28

MKA-571652420 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

2020-08-28

Transformer,Power Transformer,Ring Power Transformer

2020-08-27

19V2A 36W Switching Power Supply

2020-08-28

EI-66 ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

24W USB Charger,24W Charger,USB Charger

2020-08-27

30W PD Charger,30W Charger,PD Charger

2020-08-27

24W 2USB Charger,24W Charger ,2USB Charger

2020-08-27

3-8W Charger,3W Charger,8W Charger,4W Charger,5W Charger,6W Charger,7W Charger

2020-08-27

200-500W Switching Power Supply

2020-08-29

Inductance & Coil

2020-08-27

18-25W Switching Power Supply

2020-08-28

EI-28 AC ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter Linear Adapter

2020-08-28

MKS-1203000EX Switching Power Supply

2020-08-29

12-24W Medical Switching Power Supply

2020-08-27

MKS-120200EU-36 Switching Power Supply

2020-08-29

MKD-571202000 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

2020-08-28

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

EI-57 ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter INTERCHANGEABLE ADAPTOR Li

2020-08-28

36-65W Switching Power Supply

2020-08-29

EI Power Transformer Power Transformer

2020-08-27

12V2ASwitching Power Supply

2020-08-28

36-90W Charger,36W Charger,90W Charger,40W Charger,50W Charger

2020-08-27

72-200W Switching Power Supply

2020-08-29

12VDC8A 96W power supply

2020-08-28

60W 6USB Charger,60W Charger,6USB Charger,Charger

2020-08-27

24V1.5A 36W Switching Power Supply

2020-08-29
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved